Craft eyes. Plastic eyes. Safety eyes. Animal eyes. They’re called lots of different things!
You can use them for both sewn and crocheted softies. I’ve even used them in applique wall hangings. I just use a pair of wire cutters to snip off the post that sticks out after you attach the washers.
I’ve made a video (below) that shows you how to install them. In the video I’m demonstrating on a crocheted stuffed animal, but you can use these eyes in sewn softies as well. You just need to poke a hole! I like to use a ball point awl. It creates a hole by stretching the fibers around the opening instead of by cutting any of the threads. If you cut a hole in stretchy knit fabric, that hole can run over time, just like a ladder in your stockings.
I prefer eyes with ridged shanks and plastic washers. I feel like they hold the best BUT they’re harder to use with smaller size eyes. It’s just really hard to hold such tiny pieces straight while you push the very tight washer on! So for the smallest eyes (4.5 mm) you’ll get smooth shanks and metal washers instead. They’re still small, fussy pieces, but they’re not nearly as hard to work with. Also – 4.5 mm eyes are so small that I really only use them for small felt softies – the kind of softies that stand on a shelf instead of being played with a lot.
Speaking of safety – just because they’re called “safety eyes” doesn’t make them safe for babies. The eyes themselves will never come apart (here’s a video showing how to remove safety eyes – you’ll see how hard it is to do). But babies can chew through the fabric around the eye, which then frees the eye (along with the still-attached washer) which is a choking hazard. So only use these on toys for kids over three, or toys that will be played with under supervision.
Below the video I’ve also included a quickie photo tutorial for those of you who want to get ‘straight to the point’ as well as some other links you might like!
Video Tutorial for Craft Eyes
This is a little 5 minute video. Enjoy!
How to install craft eyes
Do you see those little points?
Those little ‘barbs’ dig into the fabric and keep the eye from rotating. Which isn’t a big deal if you’re just using a black craft eye, but is crucial if you’re using a comic eye. You don’t want them twisting and giving you googly eyes!
The ridges on the posts of craft eyes help the washer click on (and stay on!) securely. I love hearing the ‘click’ as I press the washer on! The ridges also help to make sure the washer presses on evenly.
So, let me show you how to install a craft eye with a plastic washer.
First, insert the post of the craft eye between the stitches on your piece where you want it to go. For sewn softies, use a ball-point awl or a small knitting needle to poke a hole. I recommend that you place the eyes first, before pressing on the washers, just to see if you like the look.
Once your eyes are positioned how you’d like, press the flat side of the washer (that’s the one with the tiny barbs!) onto the post.
Here’s a photo of how it will look (but without the fabric getting in the way… obviously, your piece doesn’t really look like this!):
I don’t want you to stress too much about this, because if you try to put the washer on backwards, it just won’t go.
Now, push! You’ll hear that click, and it’s on!
A note about smaller eyes
Most 6 mm craft eyes, because they are SO tiny, have smaller plastic washers without the ‘barbs’. And most 4.5 mm eyes (as mentioned above) have metal washers. But don’t worry, the same rule applies: flat side towards the fabric.
This post about sources for my favorite tools and supplies has links to places where you can buy safety eyes.
Here are handy links to all the posts about amigurumi eyes. . .
- What Kind of Eyes Should I Use?
- How to Use Safety Eyes
- Tips for Dark Eyes on a Dark Softie
- How to Make Glitter Eyes
- Attaching Craft Eyes through Thick Layers
- How to Remove Safety Eyes
- How to Add Felt Eyes to Your Softie
Return to the main table of contents for Let’s Learn to Crochet Amigurumi.
Move on to the lessons for standing legs.
Happy stitching!
Thank you for sharing this! I never knew there were metal eyes out there. I just love the size selection you offer! Thank you for the info and tips!
Thank you! I haven’t seen metal eyes, just metal washers 🙂
Try soaking in acetone nail polish remover for 24 hours. It really depends on the glue, however.
Hi there,I bought knitted toys from a friend,but she used eyes that she stuck on the toy.I sell at craft markets and customers won’t buy them because of the eyes.So I managed to pull the eye of the toy but the glue from the back of the eye is still stuck ,how can I dissolve this hard glue of the knitted toy.
Looking forward to reply,kind regards Lucy.
I’m sorry – but most glues are not removable after they cure. 🙁
Thank you so much for your instructional video on safety eyes. It was exactly what I needed to see. I am a visual learner.
Have a great day
Tina
Thank you so much for your tutorial! I do have a quick question regarding where do you buy your safety eye backs/clasps? I like the one that you showed here in your post because there are 3 “cuts” on them and I find it WAY easier to “click” the pieces together. The only ones I see on Amazon are the full circular pieces only. The only other time I saw these were in the wooble kits 🙁
Or if you could even give me the terms to search for that would be amazing !! Thank you so much for everything !!
You can find links to sources for my favorite tools and supplies (including eyes) here. https://www.shinyhappyworld.com/2022/11/my-favorite-tools-and-supplies.html