Several years ago my mother-in-law made us a fantastic flannel rag quilt. We use it all the time, and every time I look at it I think that it would be super easy to add applique to that style of quilt.
I finally did it!
And it was just as fun and easy as I thought. 🙂
I made mine using the Bunches of Bears quilt pattern, but you could use any quilt pattern you like. All the square quilt blocks in my own patterns are already sized for 10 inch blocks. If you’re using someone else’s pattern you may need to enlarge or reduce the images.
So let’s go!
My quilt is nap sized – 50 x 60 inches – perfect for using on the couch. It’s 5 blocks wide and 6 blocks tall and the blocks all finish at 10 inches.
You can resize the pattern by changing the size of the blocks or by changing the number of blocks. 🙂
I used ten flannel colors (one of each color in the Dash Plaid collection from Dear Stella Fabrics) and bought one yard of each.
I prewashed my flannel. I think people don’t usually do that for rag quilts, but flannel is notorious for shrinking a lot and I didn’t want the shrinking to distort the applique. Don’t use fabric softener in the wash – it can resist the fusible adhesive. Dryer sheets are fine.
Each block is three layers of flannel, so you’ll need to cut 90 blocks, each 11 inches square. You can get nine from one yard of fabric.
Sneaky tip – if you have some ugly flannel that you can’t figure out how it got into your stash, cut 30 of the squares out of that and hide it in the middle of your layers. 🙂
Applique 30 of the squares using any method you like. I used my favorite fusible adhesive method. There’s a video tutorial here. I used Heat & Bond Lite printable fusible adhesive sheets and regular cotton here. You could use flannel for the appliques too if you like, but I wanted to play with the contrasting textures. 🙂
When you position your faces, line up the bottom edge 3/8 inch up from the bottom edge of the block. That way, when you sew the blocks together using 1/2 inch seam allowance, you’ll catch the bottom edge of the applique in the stitching and it will be nice and secure.
Fuse the face into place.
Layer a second square of flannel behind the one with the applique (both facing right side up).
Stitch down all the edges on your applique. Outlining through both layers of flannel adds just a little bit of poof and dimension to your block – not as much as quilting with batting, but similar.
I used the “scribbly” method of going around each bit three times with regular weight black thread and a simple straight stitch. There’s a post here with more detail about that, and one here with more info about using a heavier weight thread if you prefer that.
This post has tips for stitching the tight curves around the eyes, and also for stitching the mouths. And this one has tips for making dark eyes show up on dark faces, like this cutie.
After you get all 30 blocks appliqued, it’s time to sew them together. This was actually the hardest part, because it’s backwards from any other kind of sewing you’ll do normally.
Add a third layer of flannel to each block, this time with the right side facing the back of the quilt. (It’s going to become your quilt back.)
Using 1/2″ seam allowance, sew two blocks wrong sides together so that the seam allowance is on the right side of the quilt.
Here’s what it looks like from the back.
See? That last layer of flannel makes a nice quilt back, and you have a nice clean seam.
I joined all of my blocks into rows of five, then sewed those rows together for the finished quilt.
The intersections can get very bulky, so I snipped into the seam allowance 1/2″ from each edge and sewed my crossing seam through that slit so I wasn’t stitching the seam allowance down.
And look – my seam secures the bottom edge of each bear, just like I planned. 🙂
I found it helpful to use my quarter inch foot, but adjust it out to 1/2 inch for sewing all those layers together.
I also lengthened my stitch to 3.0 and reduced the pressure on my presser foot to keep the layers from creeping. If you can’t make that adjustment on your machine, just use a lot of pins or clips, as if you were sewing napped fabrics together.
Once all the blocks are sewn together, sew all the way around the outside edge of the quilt, one half inch in from the raw edge.
Now it’s time to snip all those seams.
Snip 1/2 inch apart all along all the seam allowances, almost up to the stitching line. Be very careful not to cut into your stitching. If you slip and snip it, repair it now by sewing over the snipped seam.
If you’re trying to snip with regular scissors, you’ll need to take a LOT of breaks. They’re really not designed for this kind of work.
If you can afford to buy a special set of snips just for this kind of work, it is absolutely worth it. I tried several brands and the Fiskars Easy Action Tabletop Rag Quilt Snips were by far my favorite. They have a spring action, so their default setting is open, which saves a surprising amount of strain on your wrist. They’re super sharp, and the blades are slightly serrated, so they really grip the fabric well, helping them cut right up to the tips of the blades without “pushing” the fabric out at all.
Even with the fancy snips I took a break between snipping the horizontal and vertical seams. It took about two hours total.
Don’t forget to snip around the outside edges too.
When you’re done snipping, throw it in the wash and tumble dry.
Ta daa!
All those snipped edges fray in the wash and you get a really soft, fluffy ridge between each block. This blanket is just begging for someone to snuggle under it.
If you make an applique flannel rag quilt, we’d love to see it! Post a photo in the Shiny Happy People group so we can all oooh and aaah. 🙂
Find links to all the posts about pattern size and layouts here.
Quilt Sizes and Supplies Needed
Play with Your Layouts – Multiple Possibilities for One Quilt Pattern
Sashing
- How to Add Sashing to a Quilt
- How to Add Sashing to a Quilt Pattern
- How to Add Sashing to a Quilt As You Go Quilt
- How to Pin Long Seams
- How to Make Wonky Faux Sashing with Quilt As You Go Blocks
How to Make Applique Bust Out of Its Frame
Alternate or Broken Grid layouts (adding half and double blocks)
- How to Make a Quilt with an Alternate Grid
- Quilt Block Sizes for Alternate Grid Layouts
- How to Assemble a Quilt that Uses an Alternate Grid
- How to Quilt a Broken Grid
How to Make an Applique Rag Quilt
How to Make a Wonky Churn Dash Frame for Any Block
Finished with this topic?
Return to the Let’s Make a Quilt main Table of Contents.
Move on to the lessons about choosing your fabric.
Happy stitching!
I have made some of these before, but used batting and an X across the block. I have been asked to make a memory t-shirt quilt for a family that just lost the Dad. They are also a family that LOVES cats. I have your cat pattern and think this might be good. How do you think it would do to have 2 layers of flannel with t-shirts as the backing square?
I think it would work fine, but it will look a little different because the t-shirt layer won’t fray. You might want to make a tiny sample (just four squares with scraps), snip it and toss it in the washer and dryer just to make sure you’re happy with the final look before you commit to a whole quilt.
I’m now on my 3rd appliqued rag quilt. I have found that snipping as you go is much easier on the hands. I sew the 1st 2 rows together and snip the first, then another row and snip the row before it. I have also found if you brush the seams with a stiff vegie brush prior to washing it rags better and you get a ton of fluff out before it gets into your washer. I stuff my rag quilts into a large pillowcase and tie the top before putting into the washer
Thanks for the great post Wendi! I am about to begin a project similar to yours but bed size and 12” blocks. I’ll have appliqué on every other block. I was planning to do as you did, appliqueing through the first 2 layers of the 3 layer block. Will that back layer sag without anything to tack it to the first 2 layers? A traditional X through the block would detract from the appliqué. Thoughts? Thanks!
I suspect it would be just fine. My 10 inch blocks have no sag at all, and flannel is really clingy. I think you could go up to 12 inch blocks with no problem, but you could always make a little test square of four blocks and toss it in the washer and dryer a few times just to make sure.
Pingback: DIY Easy and Thrifty Rag Quilt
Are the appliques made out of regular fabric or flannel
On my sample I used regular fabric for the appliques, but you can use flannel too.
I thought I saw some instructions for hats, glasses and other acessories for the bears. Am I mistaken? What about using some different material for texture on the bears?
Thanks
The accessories pattern is here https://shop.shinyhappyworld.com/collections/quilt-patterns/products/fancy-doodads-applique-pattern. It’s called Fancy Doodads. And using different fabrics for the bears is great! There’s a tutorial here showing how to applique with soft fleece https://www.shinyhappyworld.com/2016/10/how-to-applique-with-fleece.html and there are links at the bottom of that post to tutorials for other specialty fabrics. Have fun!
Thank you for this pattern. I’ve marred a tag quilt before and it was fun. Can’t wait to make it with the appliques.
Could you appliqué through all 3 layers, like a traditional rag quilt with a X, but just with the bear head shape? I would think that would work just fine. Love your patterns, Wendi.
Yep!
I just made a small sample (without applique) to see how the flannel would work. I like it! But I have a question: how do you snip at the corners of the quilt? I don’t want to cut so that a square comes off at each corner. Could you show how to do it? Thank you.
I don’t snip the corners. 🙂 Once you pop it in the wash it all curls up and nobody will notice they aren’t snipped.
Do you recommend any stay stitching or pre-washing the flannel? Also, would using a spray starch to stiffen before cutting prevent the appliqué from adhering?
I never stay stitch my flannel – I just toss it in the wash. There’s definitely some fraying – but not enough to make me take the time for stitching first. 🙂 I don’t normally use spray starch, so I can’t speak from experience there. My gut says it probably depend on how much starch you use.
How could I add a layer of cuddle fleece to the back? I know it doesn’t fray nicely so I was thinking of just “stitching in the ditch” to secure it..but what about the edges?
The edges won’t fray up like the rest, but I think it would still look great.
I love your tutorials, because they break the process down into easy steps. And because you give hints like using up flannel you don’t love as the middle fabric. And most of all because the finished quilts are so great!
Hello Wendi , I love this post on rag quilting quilt squares. With flannel, I love flannel is cozy and soft and gives your quilt that special warm feeling. Your instructions we’re very detailed and easy to follow which I can appreciate. I especially like the way you described putting the flannel backing piece. So that you can quilt it as you go It’s perfect. I only have two of your patterns right now. 1 is the cars, and the 2nd. One is the paper dolls. But you have so many other patterns I want. So I’m going to be looking through them, and choosing my favorite. Before I try this rag quilt. Thank you for posting, looking forward to all of your posts as usual.